Eezi-Awn Blade 40th Edition vs Overland Vehicle Systems HD Bundu 2 Cantilever
The Eezi-Awn Blade 40th Edition and the Overland Vehicle Systems HD Bundu 2 Cantilever are both hardshell tents in the same part of the market, which makes them a genuine head-to-head rather than a comparison across categories. Eezi-Awn and Overland Vehicle Systems take noticeably different approaches to the same problem.
By the numbers, the Eezi-Awn Blade 40th Edition brings 82 kg, 140 cm of headroom and sleeps 2. The Overland Vehicle Systems HD Bundu 2 Cantilever counters with 67 kg, 3.35 m² of floor, 119.38 cm of headroom and sleeps 2.
The HD Bundu 2 Cantilever is 15 kg lighter at 67 kg against 82 kg, which on a factory roof rated for 68 to 75 kg is often the difference between a legal fit and a rack upgrade. Headroom separates them further: 140 cm in the Blade 40th Edition against 119.38 cm, which is the difference between sitting up to dress and doing it lying down. Their list prices are within a few percent of each other, so price is unlikely to decide this one.
The Blade 40th Edition uses aluminium (extruded base with two 8mm accessory slots); the HD Bundu 2 Cantilever uses high-impact UV-stable ABS over aluminum honeycomb base. Canvas differs too: 260 g/m² Teflon-coated polyester ripstop against 280g rip stop poly cotton canvas body, 420D polyester Oxford rainfly. The Blade 40th Edition adds the ability to carry cargo on the shell, which the HD Bundu 2 Cantilever does not offer.
Eezi-Awn
Blade 40th Edition
The Blade 40th Edition is an aerodynamic aluminium hard-shell tent with an extruded base carrying two 8mm accessory slots and a K9 rack platform on top rated for solar panels, bikes or kayaks. Eezi-Awn lists an 82kg weight, packed dimensions of 2200 x 1450 x 320mm (rear), two stainless-steel locks, revised gas struts and a USB port. It is one of Eezi-Awn's aluminium hard-shell models.
- K9 roof platform rated for solar panels, bikes or kayaks
- Stainless-steel locks and revised gas struts
- Published 82kg weight and packed dimensions
- Manufacturer does not publish mattress thickness, capacity or open dimensions on this page
Overland Vehicle Systems
HD Bundu 2 Cantilever
The HD Bundu 2 is a budget-oriented cantilever hardshell in OVS's HD line, using a high-impact UV-stable ABS shell over an aluminum honeycomb base and sleeping two. It opens to a roughly 63 x 82.5 in floor with a 47 in interior height and includes a skylight, an LED light strip and a 1 in high-density foam mattress with an anti-condensation mat. OVS gives a 4-year fabric and structural warranty; dry weight is 156 lb.
- ABS cantilever shell over aluminum honeycomb base
- Skylight and LED light strip included
- Anti-condensation mat included
- Only a 1 in mattress
Which one to pick
Take the HD Bundu 2 Cantilever if your roof load limit is the binding constraint. Beyond that the feature rows below — heater port, skylight, annex, cargo rails — are where the remaining difference lies.
Every specification, side by side
| Specification | ||
|---|---|---|
| Overview | ||
| Type | Hardshell | Hardshell |
| Opening style | Clamshell | Clamshell |
| Sleeps | 2 | 2 |
| Season rating | — | — |
| List price | $2,690— best of the tents compared | $2,699.99— worst of the tents compared |
| Weight and size | ||
| Weight | 181 lb— worst of the tents compared | 148 lb— best of the tents compared |
| Packed length | 7 ft 3 in— worst of the tents compared | 5 ft 3 in— best of the tents compared |
| Packed width | 4 ft 9 in— worst of the tents compared | 3 ft 7 in— best of the tents compared |
| Packed height | 12.6 in— worst of the tents compared | 12 in— best of the tents compared |
| Living space | ||
| Sleeping length | — | 5 ft 3 in |
| Sleeping width | — | 6 ft 10 in |
| Floor area | — | 36.1 sq ft |
| Interior height | 4 ft 7 in— best of the tents compared | 3 ft 11 in— worst of the tents compared |
| Mattress thickness | 3.1 in— best of the tents compared | 1 in— worst of the tents compared |
| Setup and build | ||
| Setup timeManufacturer's claim where published; otherwise estimated from tent type. Expect longer in practice. | ~60 secest. | 3 min |
| Shell material | Aluminium (extruded base with two 8mm accessory slots) | High-impact UV-stable ABS over aluminum honeycomb base |
| Fabric | 260 g/m² Teflon-coated polyester ripstop | 280g rip stop poly cotton canvas body, 420D polyester Oxford rainfly |
| Warranty | — | 4years |
| Features | ||
| Integrated LED lighting | — | Yes |
| Heater / HVAC port | — | No |
| Roof skylight | — | Yes |
| Annex available | — | — |
| Solar ready | Yes | — |
| Carries cargo on top | Yes | No |
| Sources | ||
| Last verified | Eezi-Awn product page | Overland Vehicle Systems product page |
Related comparisons
- Blade 40th EditionvsSE-180
- Blade 40th EditionvsKozi HighRize 1250
- Blade 40th EditionvsRock Cruiser Pro
- HD Bundu 2 CantilevervsHD Bushveld 4 Cantilever
Or read the full spec sheets for the Eezi-Awn Blade 40th Edition and the Overland Vehicle Systems HD Bundu 2 Cantilever.