RooftopTentCompare

Eezi-Awn Blade 40th Edition vs Overland Vehicle Systems XD Atlas Cantilever ABS

The Eezi-Awn Blade 40th Edition and the Overland Vehicle Systems XD Atlas Cantilever ABS are both hardshell tents in the same part of the market, which makes them a genuine head-to-head rather than a comparison across categories. Eezi-Awn and Overland Vehicle Systems take noticeably different approaches to the same problem.

By the numbers, the Eezi-Awn Blade 40th Edition brings 82 kg, 140 cm of headroom and sleeps 2. The Overland Vehicle Systems XD Atlas Cantilever ABS counters with 82 kg, 3.37 m² of floor and sleeps 2.

The Blade 40th Edition lists about 7% lower than the XD Atlas Cantilever ABS.

The Blade 40th Edition uses aluminium (extruded base with two 8mm accessory slots); the XD Atlas Cantilever ABS uses ABS plastic over aluminum honeycomb base. Canvas differs too: 260 g/m² Teflon-coated polyester ripstop against 320g rip stop poly cotton Oxford.

Eezi-Awn

Blade 40th Edition

The Blade 40th Edition is an aerodynamic aluminium hard-shell tent with an extruded base carrying two 8mm accessory slots and a K9 rack platform on top rated for solar panels, bikes or kayaks. Eezi-Awn lists an 82kg weight, packed dimensions of 2200 x 1450 x 320mm (rear), two stainless-steel locks, revised gas struts and a USB port. It is one of Eezi-Awn's aluminium hard-shell models.

  • K9 roof platform rated for solar panels, bikes or kayaks
  • Stainless-steel locks and revised gas struts
  • Published 82kg weight and packed dimensions
  • Manufacturer does not publish mattress thickness, capacity or open dimensions on this page

Overland Vehicle Systems

XD Atlas Cantilever ABS

The XD Atlas is a cantilever hardshell using an ABS-plastic shell over an aluminum honeycomb base, sleeping two. It comes with LED interior lighting, a skylight, integrated crossbars and a heater/AC port, and carries a 6-year fabric with limited lifetime structural warranty. At 180 lb dry it is lighter than OVS's aluminum-shell XD models; OVS does not publish the mattress thickness or interior height for this model.

  • Relatively low 180 lb dry weight for a hardshell
  • LED, skylight, crossbars and heater/AC port included
  • 6-year fabric / limited lifetime structural warranty
  • Manufacturer does not publish mattress thickness

Which one to pick

These two are closely matched on the numbers that usually decide it. Read the feature rows below — heater port, skylight, annex — and let whichever of those you will actually use break the tie.

Every specification, side by side

Side-by-side specifications for Eezi-Awn Blade 40th Edition, Overland Vehicle Systems XD Atlas Cantilever ABS
Specification

Overland Vehicle Systems

XD Atlas Cantilever ABS
HardshellCheck current price
Overview
TypeHardshellHardshell
Opening styleClamshellClamshell
Sleeps22
Season rating
List price$2,690— best of the tents compared$2,899.99— worst of the tents compared
Weight and size
Weight181 lb180 lb
Packed length7 ft 3 in— worst of the tents compared5 ft— best of the tents compared
Packed width4 ft 9 in— worst of the tents compared4 ft 4 in— best of the tents compared
Packed height12.6 in— best of the tents compared13 in— worst of the tents compared
Living space
Sleeping length7 ft 3 in
Sleeping width5 ft
Floor area36.3 sq ft
Interior height4 ft 7 in
Mattress thickness3.1 in
Setup and build
Setup timeManufacturer's claim where published; otherwise estimated from tent type. Expect longer in practice.~60 secest.2 min
Shell materialAluminium (extruded base with two 8mm accessory slots)ABS plastic over aluminum honeycomb base
Fabric260 g/m² Teflon-coated polyester ripstop320g rip stop poly cotton Oxford
Warranty6years
Features
Integrated LED lightingYes
Heater / HVAC portYes
Roof skylightYes
Annex availableYes
Solar readyYes
Carries cargo on topYesYes
Sources
Last verifiedEezi-Awn product pageOverland Vehicle Systems product page

Related comparisons

Or read the full spec sheets for the Eezi-Awn Blade 40th Edition and the Overland Vehicle Systems XD Atlas Cantilever ABS.